Wireless Drillers Display
Say goodbye to driller display cables
By going Wireless there will be no more cables getting dirty and damaged on site, or having to move equipment around just because your driller display cable is too short to reach the driller’s cabin!
With a range of up to 3 km (9850 feet), Prime Horizontal’s new “Wireless ParaTrack Driller Display Adaptor” is perfect for any HDD job site drilling a pilot hole with ParaTrack.
Easy to setup, and flexible. The transmitter is powered by the standard ParaTrack interface box. The receiver is powered by a standard 2.1A USB power source (e.g. phone charger) and the receiver also provides power to the Driller Display itself. This gives the driller a variety of power options to choose from, 220V, 110V, 12V etc and an easy “plug and play” setup.
The Prime Horizontal Wireless Driller Display Adaptor will work with all existing greyscale ParaTrack Driller Displays and interface boxes regardless of age.
The advantages of utilizing the Wireless Driller Display Adaptor onsite are:
- No more Driller Display cables
- Range up to 3 km (9,850 ft)
- Plug & play
- Works with all existing greyscale ParaTrack displays
- Low Baud rate gives high resistance to signal interference
- Crush proof
- No batteries necessary- powered by standard USB power source
- Water resistant up to IP 67
| Technical Specifications |
|---|
| Dimensions : 19 x 9.8 x 6.2 cm (7.5 x 3.9 x 2.4") |
| Weight : 800 g/1.8 lbs (per set) |
| Range : 500 m (1,640 ft) |
| Input : 2.1A USB power source |
| Power supply options : 220/110/12 V |
| Water resistant : IP 67 |
| Frequency : 433 MHZ |
| RF power : 50m W/ 17 dBm |
| Operating temperature : -25°C to 65C (-13-149 °F) |
For more information please
Doctors Without Borders
Prime Horizontal contributes a percentage to Doctors without Borders. We are proud to place their contact information on our site, should you wish to know more about them or wish to contribute yourselves, click on their logo.
